Superglue activator
Superglue ACTIVATOR is used in cases of non-optimal environmental conditions, thick glue layers, gluing inactive materials or for curing runaway glue.
Characteristics:
Is translucent/clear compared to competing products and does not show white edges.
Is for activating SUPER Glue 5, 25 and 140.
Consisting of activator additive, solvents and the propellant propane/butane.
Use:
The use of SUPER glue ACTIVATOR spray is necessary in case of non-optimal environmental conditions (e.g. dry and/or cold air). The curing of Super glue 5, 25 and 140 is considerably accelerated. Use is highly recommended for non-optimal ambient influences, thick adhesive layers, bonding inactive materials or for curing runaway adhesives.
Suitability:
The recommended application temperature is between +10°C and 30°C. Shake the spray can before use.
Superglue ACTIVATOR can be used in 2 ways:
1. To apply the adhesive:
Apply the activator spray on one side and let it evaporate. Apply Superglue 5, 25 or 140 to the untreated surface. Then quickly press the surfaces together and allow the adhesive to cure.
2. After applying the adhesive:
Apply the adhesive to the surface to be bonded and quickly press both sides together. Then spray Superglue ACTIVATOR onto the area to be bonded and allow it to harden.
Contents: 200 ml spray can.
Before use, test the adhesive strength of the adhesive and activator on the material to be used.
The information on this website, especially the suggestions for processing and use of the products, is based on our experience and latest findings. As the materials can be very different and we have no influence on the working conditions, we recommend carrying out sufficient tests to confirm the suitability of the products. Liability is excluded on the basis of this information , nor of oral or written advice. Please refer to the information in our MSDSs.
Accessoires
Social media