Superglue 5 High-Performance
SUPERGLUE 5 high-performance, super glue adhesives have been developed for special applications and are used where universal instant adhesives do not achieve optimum results. SUPERGLUE 5 high-performance is extremely resistant to moisture and does not leak through paper or cardboard.
In combination with Superglue Filler, the adhesive can be used for sealing holes and bonding joints. The combination of Superglue 5 and filler can be sanded both manually and mechanically. The adhesive is overcoatable, do test in advance if the paint has adhesion.
Characteristics:
Capillary properties.
For porous surfaces and absorbent materials - universally applicable.
For plastics, rubber, (foam) rubber soft, plastic, wood, cork, paper, leather, ceramics etc. .
Fast curing in less than 5 seconds.
Can be processed at high humidity.
Suitability for plastics: Good
Suitability for rubber: Very good
Suitability for metal: Very good
Suitability for porous surfaces: N/A
Physical characteristics (in liquid form)
Chemical specification: Ethyl cyanoacrylate Monomer
Colour: transparent/colourless
Softening point: +130°C
Flash point: >81°C
Density: 1.06 g/cm³
Hardness (Rockwel): M 58
Viscosity: 15-25 mPa.s
(Cone & Plate) at 25°C
Fully cured: 24 hours
Solubility: DMF, acetonitrile, acetone
Temperature range:
-40°C to +85°C
Content: 20 gr.
Notes:
The information on this website, especially the suggestions for processing and use of the products, is based on our experience and latest findings. As the materials can be very different and we have no influence on the working conditions, we recommend carrying out sufficient tests to confirm the suitability of the products. Liability is excluded based on this information, as well as on oral or written advice. Please refer to the information in our Material Safety Data Sheets (MSDS).
Use opened containers at short notice.
Accessoires
Social media