Superglue 140 Universal
SUPERGLUE 140 UNIVERSAL instant adhesive, with medium viscosity, bonds not only plastics, EPDM, ABS, polycarbonate, neoprene, nitrile rubber (NBR), aluminium and metal, but also porous and absorbent materials such as balsa wood, cork, paper, leather, ceramics, etc. Superglue 140 UNIVERSAL instant adhesive is suitable for fast, clean and almost invisible bonding.
Charcteristics:
Fast curing in less than 5 seconds.
Universal use.
Suitable for plastics:
Very good
Suitability for rubber:
Very good
Suitability for metal:
Good
Suitability for porous materials:
Good
Physical characteristics (in liquid form)
Chemical specification: Ethyl cyanoacrylate monomer
Colour: transparent/colourless
Flash point: > +81 °C
Density: 1.06 g/cm³
Viscosity (Brookfield): 80-120 mPa-s
Softening point: +130 °C
Hardness (Rockwell): M58
Fully cured: 24 hours
Solubility: DMF, Acetonnitrile, Acetone
Temperature range:
-40 °C to +85 °C
Content: 20 gr.
Notes:
The information on this website, especially the suggestions for processing and use of the products, is based on our experience and latest findings. As the materials can be very different and we have no influence on the working conditions, we recommend carrying out sufficient tests to confirm the suitability of the products. Liability is excluded on the basis of this information , nor of oral or written advice. Please refer to the information in our MSDS.
Use opened packages at short notice.