Cobalt drill bit of 2 mm.
A cobalt drill bit of 2 mm is supplied as standard with the Stonefix Do-it-yourself set 195 ml. and the Stonefix Professional set 400 ml. injection adhesive 2K. In most cases, this drill bit will be sufficient or good enough to drill a hole in the joint.
Tip: Do check beforehand that the width of the joint is at least 2 mm.
If not and the joint is smaller than 2 mm, you can't drill with a 2 mm drill bit.
You should then use a smaller drill bit.
Extra tip: If you start drilling and you feel the drill bit hitting the tile, stop immediately, because there is a good chance you will break off pieces of the tile.
Then you should switch to a smaller drill bit.
Deliverable: per piece
Article no
STONE005