Beltraco Superglue Gel
Ideal for vertical surfaces and porous materials. Beltraco Superglue GEL makes it easy to work in unfavourable places, e.g. when working overhead or on vertical surfaces. This adhesive has a filling power so that small missing pieces or parts that do not fit exactly do not pose a problem in contrast to low-viscosity adhesives.
At the same time, Beltraco Superglue GEL guarantees stable adhesion and prevents unwanted tracking of the adhesive. Beltraco Superglue GEL glues metals, ceramic materials, plastics, rubber as well as porous, absorbent materials such as wood, cork, etc.
Note: product contains ethyl-2-cyanoacrylate
Characteristics before curing:
Chemical properties: Ethyl-2-cyanoacrylate monomer
Colour: transparent
Viscosity (1) [mPas]: 90,000-130,000
Density (2) [g/ml]: 1,04-1,06
Flash point (3) [°C]: +87°C
Application temperature [°C]: optimal at +23°C
1) At 25°C, Brookfield viscometer
2) Measured according to DIN 53217, Part 2 Density Ball Model 475/111
3) Measured according to DIN 51755
Characteristics after curing:
Tensile shear strength [N/mm 2]: 14-16
Temperature scope [°C]: -10
Temperature resistance [°Cl: -40 to +85°C
Optimal spacing: no difference
Solubility: DMF. Acetone. Acetonitrile
Use:
The surface to be glued must always be free of dust, oil, grease or other contaminants. Always use an industrial cleaner to ensure an ideal gluing process. Use the recommended cleaning agents and a lint-free cleaning cloth. Also take into account the evaporation time of the cleaning agent used. The adhesive and the surfaces to be bonded must be at a temperature between +18°C and +25°C before application to optimise the adhesive to maximise adhesive strength.
Storage life and storage:
The maximum shelf life is 12 months at the optimum storage temperature of +2°C to +10°C in the sealed original packaging. A higher storage temperature results in a significantly shorter shelf life. The storage temperature should not be lower than +2°C.
Deliverable: 20 g tube
Social media