Professional repair and cleaning solutions for surface damage
Menu
 

Stonefix 400 ml. Injection adhesive 2K | professional set | for loose-laid and hollow tiles

Stonefix is a professional set injection epoxy adhesive on a 2-component basis, suitable for filling/fixing hollow and loose-laid floor and wall tiles, but also suitable for lacquered wooden floors, laminate and PVC floors. This without any chopping and breaking. The double tube should be processed with a caulking gun. Excess material or ‘film’ (haze) on the floor is best removed with an alkaline-based Epoxy Residue Remover.

What are the main properties of Stonefix's injection adhesive 2K?
- The injection adhesive 2K is very strong.
- The injection adhesive 2K will cure after certain time (5 to 8 hours) depending on humidity and ambient temperature.
- The 2K injection adhesive is highly liquid. This means that the injection adhesive will pass through all openings under the tile. The smallest minuscule openings will be filled. You can almost compare it to water, so liquid. - The injection adhesive 2K has great flexibility. It has greater flexibility than the floor tiles themselves.

Storage:
Between 5°C-20°C. Protect from frost.
Processing temperature: at least +5°C.
At low temperature of the Stonefix 2K injection adhesive, it can be warmed up by e.g. placing it for 10 minutes in a bucket with warm water. Always close tightly.

Additionally, always apply the cap in the same way, a to a and b to b, otherwise you will have mixing of the 2-components and it will get stuck.

Usage:
For tiles glued (best is double glued) with tile adhesive, usage is between 1 and 2 litres of injection adhesive per m².
For tiles laid in cement/mortar, usage is between 3-5 litres per m².

Set contents:
1x Stonefix injection adhesive 2K tube 400 ml.
1x Cobalt drill bit 2 mm.
2x Stonefix End tips
1x Stonefix Mixing tips for 400 ml. tubes
1x User manual

Usage:
For tiles glued (best double glued) with tile adhesive, usage is between 1 and 2½ litres of injection adhesive per m². 
For tiles laid in cement/mortar, usage is between 3-5 litres injection adhesive per m². 

 

Deliverable: as a set

 


Article no
STONESET400
Price
€ 55,00 Excl. 21% VAT and freight costs
Consumer price
€ 66,55 Incl. 21% VAT and excl. freight costs
In stock, delivery time 1-3 days

Graduated prices
QuantityPrice per piece
1 or more€ 55,00
5 or more € 51,50
50 or more (5 cartons)€ 45,95