TEC 820-12 hot melt glue gun

With variable temperature setting equipped industrial glue gun for melting hot-melt glue rods with a diameter of 12 mm. Robust and easy to use, medium operation, 2-minute warm-up time and an illuminated ON/OFF switch.

Caution!
Never lay the applicator on its side when it is hot. Hot melt adhesive may escape uncontrollably. Burn hazard! Filler residues in the PTC heater must never be removed by force (e.g. with a scraper or screwdriver). This may damage the inner lining of the melting chamber. Never use force (e.g. pliers) to loosen cooled glue sticks. Never pull the old glue stick out of the device. This may damage the transport mechanism.

Melting capacity: 2.5 kg/per hour (100 sticks/per hour)
Stick size: 12 mm.
Voltage: 120 V and 230 V
Wattage: 250 W
Heater: cartridge
Temp. control: variable
Melting point hot melt: adjustable from 130°-200°C
Melting point low melt: as mentioned above
Electric cable: 3 metres
Weight: 770 grams
Packaging: box